Female Paladin - Full Plate Armor Greatsword 32mm

🛠️ Support the Process!

💡 What you see is what you get: Unlike many profiles that only upload digital renders of unprintable models, every single design here is fully test-printed, refined in Blender/Meshmixer, and optimized for FDM before release.

I spend hours tweaking geometries, custom supports, and wasting my own filament so that you can enjoy a flawless, hassle-free print on your first try.

If my test-printing hours saved your time and filament, feel free to keep my printers running and fuel the next project! Any support is greatly appreciated: paypal.me/mjrko84

The Knight Commander This highly detailed miniature stands as a beacon of justice and strength. She is clad in full, ornate plate armor with a long, flowing cape, holding a massive greatsword in a resting pose of vigil. Her calm expression and solid stance make her the perfect centerpiece for any lawful good party or a formidable commander for a wargaming army.

The sculpt features deep recesses in the armor plating and the folds of the cape, making it excellent for painting with washes and highlighting.

Perfect as a Paladin, Fighter, or Knight PC/NPC in tabletop RPGs like Dungeons & Dragons, Pathfinder, or Frostgrave.

Lore: "My faith is my shield, my steel is my judge. While I draw breath, evil shall find no sanctuary here."

⚠️ IMPORTANT: TWO VERSIONS INCLUDED ⚠️ This model comes with two different STL files to suit your printing experience and patience level regarding support removal.

• VERSION 1: Free-Standing Sword (High Difficulty) In this version, the tip of the sword does not touch the base. It "floats" slightly above it.
  • Pros: Cleaner final look if printed successfully.
  • Cons: Requires perfectly dialed-in supports for the sword tip. Removing these supports is very difficult and carries a high risk of snapping the blade. Only recommended for experienced users with calibrated printers.
• VERSION 2: Anchored Sword (Medium Difficulty - Recommended) This version includes a small, discrete modifier that connects the tip of the sword to the base.
  • Pros: Significantly increases printing stability and reduces the risk of failure.
  • Cons: Support removal is still delicate but easier than Version 1. You will need patiently trim the small connector from the sword tip after printing. Patience and sharp flush cutters are still required!

⚙️ Designer's Print Settings (Bambu Lab A1 Tested) I have personally tested and optimized the print profile for this model on a Bambu Lab A1. Please use the provided print profile for the best results.

• Material: PLA Matte / Grey Resin.
• Layer Height: 0.08mm - 0.12mm (High Detail).
• Supports: REQUIRED.
• My Custom Support Settings (Included in Profile):
  • Type: Tree (Organic) - Better surface finish.
  • Threshold Angle: 22° - Ensures all overhangs are supported.
  • Top Z Distance: 0.16mm - Closer than standard for better underside quality.
  • Top Interface Layers: 3 - Creates a solid roof for the model to rest on.

📂 Browse All My Miniatures HERE 👇

Technical & Creative Note: This design is based on an AI generation (Tripo) that I have manually refined and tested on FDM prints to ensure printability and quality. The featured photo is of the actual physical print. I’ve included AI-colored renders only as a visual reference for those who wish to paint the miniature.