Porsche GT3RS Hueforge-Only 3 colors, 200x110x2,24

Just a hueforge test of a Porsche GT3RS. 

Only 3 colors needed - Black, Grey and White. I sliced it with 2 shades of gray, but i only have one shade, i left the layer swap instructions bellow if somebody wants to try it with 4 colors. Tested with Creality Matte White, Creality Matte Black and Ender Gray.

If you want to change the size, just change X and Y axis. If you change the Z axis, you will ruin the 3D effect.

For better bed adhesion use raft.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.

The Model is 200x110x2.24mm in size.
You may print at higher layer heights below the Base Thickness of 0.48mm.
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm.

Filaments Used:
    #000000 PLA BambuLab Matte Charcoal  Transmission Distance: 0.6
    #9b9ea0 PLA BambuLab Matte Ash Gray  Transmission Distance: 1.5
    #ffffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.5

Swap Instructions:
    Start with Charcoal
    At layer #8 (0.72mm) swap to Ash Gray
    At layer #13 (1.12mm) swap to Ash Gray
    At layer #17 (1.44mm) swap to Ivory White for the rest.