HueForge Bulbasaur Card (Card/Frame Format)
Print Profile(2)
Description
Boost Me (for free)
A 0.2 nozzle is recommended but a 0.4 works perfectly
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 143.27x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.4mm
#000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6
#00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4
#61c680 PLA BambuLab Matte Grass Green Transmission Distance: 2
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments
Change instructions:
Start with Charcoal
At layer #16 (1.36mm) swap to Turquoise
At layer #20 (1.68mm) swap to Grass Green
At layer #21 (1.76mm) swap to White for the rest
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)