Windshield Washer Holder - Car Trunk Storage Tray

✨ [ Model Overview ]   

Vehicle trunk cargo organizer designed to secure a full jug of windshield washer fluid (3.78l) from tipping over.  The tub also features 2 side pockets for smaller items.  You can securely hold a standard gallon jug of washer fluid, preventing it from tipping and sliding around. 

• Jug pocket for Windshield washer fluid container cap 3.78l
• Side pockets for smaller items
• Optional: push-in pointy triangles to limit sliding on carpeted surfaces (You can also use velco strips)

I tested the cradle with four types and brands of jugs, may not fit yours so double check yours before printing.

📐 [ Dimensions ]

   Overall size (mm):   210 x 208 x 82

   Rope holes:     ⌀7mm – (Imperial 9/32”)

   Jug pocket hole (mm):    193 x 120

   Side pockets (mm):     34 x 160

📇 [ Printing ] 

• Plastic ≈ 460 g (½ Spool)
• Time ≈ 8hrs (PETG-HF with X1C)
• Supports = Not required
• Brim = Yes
• Material:  PETG worked fine for my application.

Other notes: PLA is usually not a good filament for in-vehicle parts due to the heat.  Use the material according to your application and do not use to support heavy loads or to hang loads that could injure somebody in case of a failure.

 ⚖️ [ License and terms of use ]

When you download the files, you understand and agree that this content is licensed under a Standard Digital File License.

You can : 

(✔) Personal use : Download the digital file(s) for free and print 3D parts from the digital file(s) for your own use.

You cannot :

(X) Sell parts : manufactured from the digital file(s) or any derivative of the digital file(s), no matter how the parts are made, how many parts are made.  This also prohibits you from selling parts made from the Digital file(s) on sites such as eBay, Etsy, FB marketplace or any other location. 

(X) Share the digital file(s) or resell them. 

Liability disclaimer and use:

By downloading the digital file(s) and making a 3D printed derivative object from it, you agree that you're doing it at your own risk and understand the limitations of 3D printed parts.  The digital file(s) are not a product and the design do not give any express or implied warranty that, any product made from the digital file(s), will work or perform in a certain way. 

3D painted parts have limitations, this means do not use for applications where load bearing is regulated by law or building code or for any critical retaining application.