Massive 121 Pen Organizer Grid 11x11 – Scalable

Organize your entire pen collection in one place! 🖊️

This is a high-capacity desktop organizer designed to hold an impressive 121 pens, pencils, or fine liners. With a precise 11x11 grid layout, every tool gets its own dedicated slot, keeping them upright, separated, and easy to grab.

Whether you are an artist, a student, or just love a tidy desk, this print will help you clear the clutter instantly.
 

Compatibility / Dimensions:

• Capacity: 121 individual slots.
• Max Pen Diameter: Fits items up to 10 mm in diameter (at 100% scale).
• Perfect for: Standard pencils, ballpoint pens (like BiC), fine liners, and slim markers.

Resizing / Custom Fit: If you need to accommodate larger markers, you can resize the model in your slicer by scaling the X and Y axes only.

• How to calculate:
  • Example: 12mm target size → 120% scale (X & Y).
  • Example: 13mm target size → 130% scale (X & Y).

⚠️ IMPORTANT SCALING RULES:

1. Do NOT change the Z-axis: Keep the height (Z) at 100%.
2. Apply to BOTH plates: You must apply the exact same scale to both plates to ensure the parts assemble correctly.
3. Leave some clearance: Do not set the size exactly to your pen's diameter. Always add a small margin so the pens slide in and out easily (e.g., if your pen is 12mm, consider scaling to 12.5mm / 125%).
4. Do NOT scale down: Scaling below 100% is not recommended. Reducing the size may cause issues with the assembly tolerances, making the parts impossible to fit together.

Note: Please check your pen diameter before printing to ensure the best fit!

⭐️ Key Features:

• Anti-Tangle: The grid system prevents pens from crossing over or getting stuck.
• Stable Design: A wide base and sturdy walls ensure the holder won't tip over.
• Minimalist Look: Clean lines that fit any workspace aesthetic.

⚙️ Print Settings: This model is designed for easy printing with no special requirements.

• Material: PLA, PETG, or Matte PLA looks great.
• Supports:  None needed.
• Infill: 10% - 15% (Grid pattern recommended).
• Walls: 3 walls.
• Brim: Not required (unless you have bed adhesion issues).

Happy Printing! If you find this model useful, please leave a generic Like 👍 and share a picture of your setup in the comments!