Concrete Deck Blocks Mold

Hello everyone

I've seen these blocks very often in YouTube videos from America, but living in Italy, I haven't been able to find them. Or at least, not cheaply. So here we are:

I decided to create this mold so I could make these very convenient reinforced concrete foundation blocks myself.

The mold is composed of two parts, joined together and secured with a wrap of adhesive tape.

Before pouring the concrete inside, I recommend applying universal grease inside the mold to facilitate its removal.

A bag of pre-mixed concrete is perfect for creating one block 

The ideal curing time, after some tests, is 24 hours. Afterwards, by tapping the mold a few times with a rubber hammer, it can be removed without problems.

I also recommend inserting steel reinforcement inside to increase its resistance.

The block has a provision for placing wooden structures on top with a maximum thickness of 50mm, the upper pattern helps maintain 90-degree angles and thus build your base square.

They work very well!

Weight approx: 25kg