Service Help Dreame L10sUltraGen2

After a long and unfortunately unsuccessful search, I built a “service” holder for our robot vacuum cleaner.
The keypad remains completely untouched.
Robot: Dreame L10s Ultra gen 2
Sensor: diameter: 75mm, height: 20

Felt glides (diameter 10mm, height 1.5) fit into the holes to prevent scratching the surface, number as desired. (Simply ordered from Bezos's shop)

The holes were designed with 10.1 mm and 0.5 mm, so the felt glides fit perfectly and protrude slightly.
There is still space in the large hole to possibly attach a felt strip, thus protecting the sensor even better, but I omitted it in my version.

Infill is 25% to better smooth the top layer, it was 15% in my model, but that is completely sufficient.
Printing was successfully tested with PLA and PETG.

I hope it is as helpful to you as it is to me, if you like it, a like for Mike ;)