Heart Slider + Flip Fidget (~27 mins)

Thank you for your support! If you like our family's designs - you can sell the physical prints through a paid Patreon membership: 

https://www.patreon.com/c/SpacedOutStudio

Let this fully cool after print (you can remove from the build plate) and rotate the hinges – NOT the pin – and then press the pin between your fingers to break the supports (don’t twist the pin – see image below). If you have filament and settings dialed in you can also gently twist the pin until you feel a little resistance, then twist the other way gently until it fully loosens. The hinges should move just fine. The more you play with it, the more it will loosen. PLA will work great. Some filaments will allow movement right after the print.  If you have issues, please contact me and happy to help. 

Meet the Heart Slider + Flip Fidget — proof that sometimes the simplest designs are the most satisfying ❤️

This little heart flips, slides, twists, and slips smoothly thanks to a clean hinge-and-pin design that’s weirdly addictive. It’s the kind of fidget you grab “just to try”… and then suddenly five minutes are gone. Perfect for stress relief, desk fidgeting, or absent-mindedly flipping while pretending to pay attention.

There are four versions to match your vibe:

• a clean single-color heart
• a two-color heart with extra heart details (because more hearts is better)
• plus keychain versions of both, so you can take the fidgeting on the go

The fast print profile prints in under 27 minutes with a single color and a more robust pin profile is included too. Other profiles include 2 colors, making it easy to crank out gifts, desk buddies, or a whole rainbow of hearts. Warning: you may feel compelled to flip it “one more time.