(TF2) Horseless Headless Horsemann Headtaker Axe

Modeled after the axe of the Horseless Headless Horsemann from Team Fortress 2, and the Headtaker's Axe for Demoman. https://wiki.teamfortress.com/wiki/Horseless_Headless_Horsemann

I threw together this model in a week leading up to Halloween 2023.

I printed this all at 10% infill, 4 walls, out of PLA filament. 

Hardware:

• The handle is 1.5" OD, either wooden dowel or PVC with a plug on the end.
• Two part epoxy
• Hot staples

Assembly:

• I HIGHLY recommend using BOTH two part epoxy AND hot staples that melt into the plastic to keep these parts together. Clamping the parts is difficult, so staples work better.
• You need to assemble this on a very large, flat surface that can get messy with epoxy. Like a table covered with plastic sheet.
• This whole model will need to be sanded, gaps filled, and painted.
• The handle is screwed in from the top of the Attach part BEFORE you glue the Attach part onto the rest of the axe head. 
• The handle is 1.5" OD, either wooden dowel or PVC with a plug on the end.

This model contains no files or anything that is Valve's property. Everything was modeled off of reference images and inspecting the item in-game.