Yestech MG9 P2.9 – Grille Screw Centering Jig
Print Profile(1)
Description
This positioning jig is designed for Yestech MG9 P2.9 LED wall cabinets and helps you quickly center the tiny grille screws by using the existing reference holes on the cabinet.
In practice, the jig guides your driver straight to the correct spot, making it much easier and faster to remove/reinstall micro screws without relying on a magnifying glass or guessing by eye. It’s a handy tool for maintenance, service, and panel refurbishment, both on-site and in the workshop.
Key benefits
- Fast alignment using the cabinet’s built-in holes
- Less trial-and-error with very small screws
- Great for LED wall / AVL technicians and quick field repairs
Notes
- Compatibility: Yestech MG9 P2.9 (check cabinet revisions if hole patterns differ)
- Print with good dimensional accuracy for best centering results (tight tolerances help)
Recommended print settings
- Material: PLA
- Layer height: 0.12 mm
- Infill: 15%
Tip: Print the jig in a light-colored filament (e.g., white, light gray, bright yellow) to create strong contrast against the black LED panel/cabinet—it makes the screw heads easier to see and helps reduce eye strain during long maintenance sessions.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)