Mobula 8 Landing Legs Skids
Print Profile(1)
Bill of Materials
Description
Landing leg skids for Mobula8 FPV tiny whoop. These legs protect the battery during landing and provide a level platform for takeoff/landing. Profile attached is for PETG HF, however, any durable material will work. PLA not recommended but can work if used gently. I have used and liked these so much I had a set SLS printed out of Nylon for ultimate ruggedness.
Hardware required:
- 2 x M2 x 12 Screws
- 2 x M2 Hex Nuts
- 2 x M2 Flat Washers (optional but recommended)
- Hardware listed below for ease of access
Assembly instructions:
- Insert Hex Nut into hexagonal pocket of landing leg
- Insert rectangular stud on top of landing leg into Mobula8 frame
- Insert screw with flat washer through hole in frame
- Tighten screw (do not overtighten)
- Repeat on opposite side
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)