Search models, users, collections, and posts
Air shut-off valve - Air shut-off valve 100mm
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
6.2 h
3 plates
Open in Bambu Studio
Boost
19
51
1
0
44
12
Released
Description
An air shut-off valve for 100 mm pipes that I designed for my small hobby workshop. The valve is attached directly to an element (in my case a T-piece). The hose can be attached to the other end.
The sliding element and the main piece can be fitted with 10x2 mm magnets to fix the valve in the respective position. However, in my experience, this is not necessary, as the valve already holds well.
For the main element, two parts must be screwed together. The holes are designed for M2 screws. Gluing may also work, but I have not tested this.
One element must be printed with support. I printed the main elements from PETG, the support interface from PLA, and the seal from TPU.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (1)