Manual feed, quick-release PTFE tube connector, A/B head modeling, less force, better printing, PTFE tube quick-release connector
Print Profile(1)
Description
Improved, compared to the original version: an A/B head was made, one slightly larger, to connect with less force yet maintain tightness, and chamfers were added to all for better printing,
Quick connection, can also connect PTFE tubes on both sides, serving as an extender.
Note:: Considering the issue of varying tightness at the tube inlet due to different material shrinkage!!!
Gently push the PTFE tube into the bottom. If it doesn't fit even with significant force, magnify it slightly in the slicing software; if too loose, reduce it. Increase or decrease by about 3%.
It is recommended to print one first, then adjust the size slightly as needed later (when modifying the size, make sure to select both! Modify them together).
When copying, always copy in pairs,because it's an A/B head, the B end has a small round hole at the bottom. If needed, top surface ironing can be enabled.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)