Hueforge Kiri Avatar 3 fire and ash
Print Profile(2)
Bill of Materials
Description
KIRI
Projet: Kiri.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
The Model is 200x196.93mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.96mm and the Actual Thickness is 2.96mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#ff1129 PLA BambuLab Basic Red Transmission Distance: 4
#0000ab PLA BambuLab Basic Blue Transmission Distance: 4
#00aaff PLA Bambulab Cyan Transmission Distance: 5
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
#56b7e6 PLA BambuLab Matte Sky Blue Transmission Distance: 1.3
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 7 unique filaments
Instructions de changements:
Commencer par Black
At layer #8 (0.8mm) swap to Red
At layer #11 (1.04mm) swap to Blue
At layer #13 (1.2mm) swap to Cyan
At layer #18 (1.6mm) swap to Red
At layer #22 (1.92mm) swap to Yellow
At layer #28 (2.4mm) swap to Sky Blue
At layer #32 (2.72mm) swap to Jade White pour le reste.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)