Oversized diamond Ring prop (Inspired by Birdo)
Print Profile(1)
Description
Inspired by Birdo and the absolute rock on her finger every time I play Mario cart with my friends, I wanted to make a ridiculously large ring for my partner and so this was created as a result. Highly recommend using translucent PLA to really sell the look.
The internal diameter of the model is 17.8mm and after shrinkage from a standard PLA it was about 17.7 all the way around. I was aiming for a 7.5 ring size (US) and it fit but was a bit snug for reference. If you would like to size it a bit better I included a reference chart I found below. I don't know how correct it is since I did see a few difference reference numbers but it should at least get you close.
| Ring Size | Diameter (mm) | Scaling (%) |
|---|---|---|
| 3 | 14 | 79.10 |
| 3.5 | 14.4 | 81.36 |
| 4 | 14.8 | 83.62 |
| 4.5 | 15.2 | 85.88 |
| 5 | 15.6 | 88.14 |
| 5.5 | 16 | 90.40 |
| 6 | 16.45 | 92.94 |
| 6.5 | 16.9 | 95.48 |
| 7 | 17.3 | 97.74 |
| 7.5 | 17.7 | 100 |
| 8 | 18.2 | 102.82 |
| 8.5 | 18.6 | 105.08 |
| 9 | 19 | 107.34 |
| 9.5 | 19.4 | 109.60 |
| 10 | 19.8 | 111.86 |
| 10.5 | 20.2 | 114.12 |
| 11 | 20.6 | 116.38 |
| 11.5 | 21 | 118.64 |
| 12 | 21.4 | 120.90 |
| 12.5 | 21.8 | 123.16 |
| 13 | 22.2 | 125.42 |
| 13.5 | 22.6 | 127.68 |
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)