2020 Extrusion Corner or wall 90 degrees Mount

✨ [ Model Overview ]   

This model is to be used with common 2020 Aluminium extrusion bars to create a corner, a wall support or any 90° mount. 

3x M5 bolts with the T nuts are required to use with this bracket.

One side of the bracket uses 2 bolts (or screws if you wall mount it) and the other side uses only 1x M5 since the model includes a pre-designed track to slide into the 2020 T-slot.

📐 [ Dimensions ]

Width:   20.6 mm

Length:  59 mm

Height:  44 mm

Mounting holes: ⌀ 5.2 mm  (Metric fasteners: M5)  (Imperial fasteners : No.8 imperial screws)

📇 [ Printing ] No supports required for printing for all the parts.

Material: PETG-HF in Lake blue worked fine for my application, but PLA should also be perfectly fine for this indoor used print.

⚖️ [ License and terms of use ]

When you download the files, you understand and agree that this content is licensed under a Standard Digital File License.

You can : 

(✔) Personal use : Download the digital file(s) for free and print 3D parts from the digital file(s) for your own use.

You cannot :

(X) Sell parts : manufactured from the digital file(s) or any derivative of the digital file(s), no matter how the parts are made, how many parts are made.  This also prohibits you from selling parts made from the Digital file(s) on sites such as eBay, Etsy, FB marketplace or any other location. 

(X) Share the digital file(s) or resell them. 

Liability disclaimer and use:

By downloading the digital file(s) and making a 3D printed derivative object from it, you agree that you're doing it at your own risk and understand the limitations of 3D printed parts.  The digital file(s) are not a product and the design do not give any express or implied warranty that, any product made from the digital file(s), will work or perform in a certain way.