Panther KF51 German 4th-Gen Main Battle Tank 1/35
Print Profile(1)
Description
If you enjoy my work, consider supporting me ❤️ ❤️ ❤️
Buy Me a Coffee: buymeacoffee.com/bavaria3 | Ko-fi: https://ko-fi.com/bavaria3
Boost Me (for free)
Don’t miss out — follow me for more top-quality tank models!
Don’t miss out — follow me for more top-quality tank models!
All models are designed from scratch in Fusion 360 and validated through real prints using my own equipment, with no AI involved. Each design is tested and refined through multiple iterations to ensure reliability and real-world usability.
If you like my work, feel free to like, save, and share your thoughts in the comments — your feedback directly helps improve future designs.
This month, I had final exams and moved, so I was extremely busy and only managed to complete this one project.
I designed a movable main gun, a stowable missile launch box, and a freely rotating machine gun on the turret. These moving parts took a lot of time. In fact, I spent about 3 times longer on the turret than on the entire hull.
If you like my work, consider leaving a boost — it really helps me keep creating more exciting models!
================================
📋 Recommended Print Settings (For Best Results)
- Filament: PLA. Different materials have different shrink rates, so using other filaments might cause fitting issues or dimensional errors during assembly.
- Slicer: Bambu Studio. I recommend using my default profile — I’ve tuned it specifically for this model.
- Ambient Temperature: If you’re using an open-frame printer like the A1 or A1 Mini, keep your room above 20°C (68°F) to prevent warping.
- Print Bed Preparation: Wash with soap and water, then dry thoroughly to ensure good adhesion. For small parts, apply a glue stick for better bed adhesion.
🔧 Assembly Diagram Notes
- Blue Lines: Require super glue for assembly. I use Gorilla Super Glue.
- Yellow Lines: These are moving parts. Do not apply glue here.
I designed a foldable support bracket beneath the missile launch canister to secure it in the deployed position.
================================
Boost Me (for free)
If you like my work, consider leaving a boost — it really helps me keep creating more exciting models!
Membership
A lot of you have asked about selling prints of my models. If you want to use my designs commercially, just sign up for the commercial license membership — you can click this box to subscribe directly.
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (146)