Slim Wallet TPU and PLA print-in-place
Print Profile(2)
Bill of Materials
Description
🚀 New & in pre-launch: my CableDuct & LED Channel Configurator — duct, cover, corner & LED-strip parts in any size, print-ready STL/3MF.
▶ Try it free: cforms.org
★ Follow the campaign: https://makerworld.com/crowdfunding/305-cableduct-led-channel-configurator
Slim Wallet TPU and PLA print in place
IMPORTANT:
This print works only if you use TPU (really dry TPU!) and PLA in one printing.
For Printers with a Single nozzle system you can use Bambu Labs TPU for AMS, if you have a Dual-nozzle system print it with a good quality TPU.
After Printing, you have to pull out the Supports:
On the Backside you will find a TPU Support, the red part, pull it away
In each Cardslot you will find Support. PLA and TPU do not adhere to each other, so the PLA cards can simply be separated from the TPU with a thin blade and pulled out with plier. The green lines in this picture shows it:
Lift the moneyslot on the back on and you have the moneyslot.
Have fun with it
Boost Me (for free)
if you can
⚡ Any-size cable ducts & LED channels, print-ready. ▶ Free: cforms.org ★ Campaign: https://makerworld.com/crowdfunding/305-cableduct-led-channel-configurator
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)