League of Legends - Malphite
Print Profile(2)
Description
Boost Me (for free)
Thank you for all the support in 2025, looking forward to bringing you all new designs in 2026!
I have created a 200mm and 100mm Hueforge of Malphite from League of Legends.
Filaments I used:
Elegoo Dark Blue
Elegoo Silver
Elegoo Red
Elegoo Yellow
Elegoo Grey
Elegoo Skyblue
Sunlu White PLA+ 2.0
Project: malphite V6.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm
Filaments Used:
#222ed2 PLA Copymaster 3D TURBO Dark Blue Transmission Distance: 2.3
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#eb3b41 PLA Overture Matte Red Transmission Distance: 2.5
#f4c032 PLA Polysonic Yellow Transmission Distance: 5.6
#8c9099 PLA PolyLite Grey Transmission Distance: 1
#56b7e6 PLA BambuLab Matte Sky Blue Transmission Distance: 1.3
#e2dedb PLA PolyLite White Transmission Distance: 5
This print uses 8 unique filaments
Swap Instructions:
Start with Dark Blue
At layer #4 (0.4mm) swap to Black
At layer #9 (0.8mm) swap to Blue Gray
At layer #13 (1.12mm) swap to Red
At layer #15 (1.28mm) swap to Yellow
At layer #19 (1.6mm) swap to Grey
At layer #20 (1.68mm) swap to Sky Blue
At layer #23 (1.92mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)