Muscle Santa Claus – powerful Christmas figure - Free 3D Print Model

Search models, users, collections, and posts

Phil-A-Ment

Art>Sculptures

IP Report

Print Profile(3)

All

X1 Carbon

H2S

P1P

X1E

H2D

P1S

H2C

A1 mini

H2D Pro

P2S

X2D

A2L

0.2mm layer, 3 walls, 15% infill (120%)

Designer

1.1 h

1 plate

4.9(16)

0.2mm layer, 3 walls, 15% infill (80%)

Designer

40 min

1 plate

0.2mm layer, 3 walls, 5% infill

11.2 h

1 plate

5.0(2)

Open in Bambu Studio

Boost

226

459

248

102

Released

Description

Content has been automatically translated.

Show original

Boost Me (for free)

💛 Your boost makes my day better! Thank you! 😊

Muscle Santa Claus – powerful Christmas figure 🎄💪

Here is a very muscular Santa Claus. Instead of being cozy, this Santa Claus is truly powerful. The figure is robustly modeled so that it prints well and also looks strong in a single color.

Ideal as a funny Christmas decoration, an eye-catcher for a display case, or for painting.

Works great with resin and also with FDM for finer layers.

Scaled to 80%

Size 3.8cm x 1.9 x 6.3cm

Scaled to 120%

Size 5.7cm x 2.9cm x 9.4cm

Update!

Muscle Santa Woman – powerful Christmas figure

Muscle Santa Woman – powerful Christmas figure – Free 3D Print Model – MakerWorld

Muscle Santa Claus V.2 powerful Christmas figure

Muscle Santa Claus V.2 powerful Christmas figure – Free 3D Print Model – MakerWorld

“Phil-A-Ment: Where ideas take shape layer by layer.”

🔍 Click the banner & discover all designs!

This model comes with ready-to-print profiles to save you time.

Filament: See recommendation in profile.
Supports: Remove carefully to avoid damage.
Print Check: Pay attention to bed adhesion and calibrated filament to rule out common error sources.

Support: I would be delighted to receive a positive review and pictures of your finished prints!

Boost Me (for free)

"Do you like my designs? A small boost is the fuel for my next project! Thank you very much for your support! 🚀"

Comment & Rating (49)

@2ndstoryprinter

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill (120%)

Prints as expected, looks good. a little painting helps it. Update: I decided to paint this in Bambu Studio and reprint. It will be an AMS print of course.

(Edited)

The profile uploader has replied

@PhiL.a.Ment

Thank you for your review The print looks great

Show original

@2ndstoryprinter

Boosted

Replying to @PhiL.a.Ment :

Yes it printed really well. I also used Fuzzy Skin (Contour .15/.15)

@user_253335270

did you have to manually paint each section in bambu lab or did you figure out a way to do color fill for each section?

@user_1236668313

Print Profile

0.2mm layer, 3 walls, 15% infill (120%)

I added putty to the top surface and painted it with a brush. Thank you for the model with such excellent detail!

The profile uploader has replied

@PhiL.a.Ment

Thank you for your review ⭐ and for sharing your great result, it looks really great. what colors did you use?

(Edited)

Show original

@user_1236668313

Replying to @PhiL.a.Ment :

Thank you for your comment. I really enjoyed painting it. Thank you for the 3D model! The colors are as follows. All are TAMIYA color. First, I brush-applied XF-63 German Gray to the dented areas. After that, I brush-applied the following colors. Body : XF-15 Flat Flesh 95% + X-7 Red 5% Red : X-7 Red 97% + XF-63 German Gray 3% Belt, Boot : XF-1 Flat Black Belt Buckle : XF-83 Medium Sea Gray 2 White : XF-2 Flat White After that, I applied thinned XF-53 Neutral Gray to the shadow areas. I hope this helps those who are painting.

@PhiL.a.Ment

Thank you for the detailed answer

(Edited)

Show original

@user_2780802578

Print Profile

0.2mm layer, 3 walls, 15% infill (120%)

printed successfully

The profile uploader has replied

@PhiL.a.Ment

Vielen Dank für die Bewertung

@banaspati

just print and paint it, super easy thank you sir

The designer has replied

@PhiL.a.Ment

Looks really nice

Show original

@user_714036464

Print Profile

0.2mm layer, 3 walls, 15% infill (120%)

excellent print. Supports came loose with little effort and left very little clean up necessary.

The profile uploader has replied

@PhiL.a.Ment

Thank you for your review. The print looks great

Show original

@user_3841534196

Print Profile

0.2mm layer, 3 walls, 15% infill (120%)

The profile uploader has replied

@PhiL.a.Ment

thanks for the rating ⭐ and for sharing the print. looks really great

Show original

@jujuelsuave

Print Profile

0.2mm layer, 3 walls, 5% infill

@PhiL.a.Ment

I'm very happy to hear that! Thanks for sharing the pictures – the result looks fantastic. Have fun with the model!

Show original

@anilntny46

Boosted

Good

The designer has replied

@PhiL.a.Ment

Thank you for your rating ⭐ and the boost

(Edited)

Show original

@2ndstoryprinter

Boosted

Such a fun model to print with a great physical appearance !! Thank you for making it available.

The designer has replied

@PhiL.a.Ment

thanks for the nice review ⭐ and the boost

Show original

@user_253335270

very cool model. Just wish I could have printed it multicolor with AMS Lite.

The designer has replied

@PhiL.a.Ment

Thank you for your review ⭐ I also wanted to upload a colored AMS version soon

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Climbing Santa Claus

Sevro

5.4 k

2.7 k

Santa Claus / NO AMS

model lover

5.5 k

2.8 k

Muscled Santa Claus

RaffNix3D

Merry Christmas Santa Door Corner

MASK3D

6.9 k

2.1 k