Role-playing Future Warrior Space Helmet - Explorer 1

Regarding size: Except for children, adults who do not have an exceptionally large head can also wear it, the opening is an oval shape, approximately 18X17.5CM. The internal space of the helmet is relatively large to allow room for sticking adhesive-backed sponges (helmet-specific ones are sold online for a few yuan), or those with strong DIY skills can use fabric (old clothes can be cut) or other soft fillings, or simply wear a winter wool hat or similar before putting on the helmet, because the printing filament is smooth and hard, it will slide when worn, normal helmets must have sufficient padding inside to ensure a snug fit and comfort, so it is highly recommended to add it

Filament colors used in the pictures: Bambu Lab PLA Basic light gray, Bambu Lab PLA Basic blue gray, orange

Recommended helmet padding with adhesive-backed sponge, adjust thickness freely according to head circumference (only a few yuan, the author's own padding is as follows for reference, for other practical sci-fi models, click on the image)

Regarding scaling: Friends who need to wear it on a doll can scale it down proportionally as a whole, fix it with glue regardless of the magnet holes

Model Introduction:

In every boy's heart, regarding future careers, there is always an ardent heroic dream, either dreaming of being an astronaut exploring unknown worlds, or becoming a future warrior galloping on the battlefield, wearing cool gear, controlling high-tech equipment, or even becoming a Titan pilot driving their own BT Titan mech. In these scenarios, whether in films or animated cartoons, protagonists are often equipped with a cool, futuristic helmet. So, perhaps your child will need such a model helmet to complete their cosplay:

1. The face shield can be opened and closed, switching between standby and combat modes (which also makes it convenient for children to talk, communicate, and eat while wearing the helmet).

2. The visor on the left side of the helmet can be retracted and lowered ( a cellophane installation slot is reserved, see installation instructions), this monocular visor is inspired by Tom Cruise's helmet in the movie Edge of Tomorrow, the human Ghost's helmet configuration in StarCraft 1, and the 'power level scouter' from Dragon Ball. It can be a 'detector' in a child's imagination, or a combat display like a 'weapon or nuclear missile locator'.

3. The flashlight holder on the right side of the helmet can hold small flashlights or laser pointers with a diameter of 26MM or less. As a space exploration helmet, it can be paired with a flashlight for illumination; as a combat helmet, it can be paired with a laser pointer to simulate 'tactical missile strike' laser-guided targeting.

Installation Instructions (illustrations see attachment): [Required: glue (essential), magnets (recommended), cellophane (recommended)]

• Glue is required to bond parts with locating pins and decorations. Magnets are recommended, default 5X2MM (technically proficient friends can modify the hole size in the slicing software), a total of 18 pieces are needed (if not using magnets, you can choose to fix the shape with glue). Please purchase official magnets or strong magnets, cheap ones from PDD and TB have very poor magnetic force, please compare them with official magnets yourself.
• The visor can accommodate colored cellophane (a large sheet costs a few cents online), cut to a size of 65X36MM. The cellophane color can be chosen according to personal preference to look cooler, or it can be left hollow.
• Before printing, please ensure your printing plate adhesion, for winter printing, try to control the ambient temperature difference.
• Friends with hands-on ability or those who pursue perfection can cut and paste sponge or fabric inside the helmet to make it more snug and comfortable.