HALO M6B MAGNUM
Print Profile(1)
Description
Boost Me (for free)
YOU CAN DO IT ! ! !
This is a remix of the Halo M6B Magnum with stand. you can choose to make if fully modular with magnets ( x8 5x10 ) or non modular by using the magnet replacement pins (for guides) instead and gluing in place. I set the build plates up in order that i would suggest printing. By printing the stand first you will be able to hold prop up while building. If you use magnets you will need 8 5x10.
magnets: https://a.co/d/bfuocxs
I wanted it this way so I could print several different colors and change them on the fly. Depending on your color choices you might want to create extra plates an move items to select color preferences, to eliminate the need of ams on those items.
AMS technically not necessary only for screws but you don't have to multi color those.
For the trigger i used a needle and cut it to hold in place and a small spring in rear to give a trigger pull. there are 2 small covers you can super glue over the ends of the needle to cover it.
CHECK OUT my JOKER mash up here : https://makerworld.com/en/models/2132670-halo-magnum-joker-mash-up#profileId-2309658
 | 
|
 |  |
|  |
 |  |
 | 
|
 |
 |
 | 
|
 | |
PLEASE contact me with any issues or questions prior to feedback I am more then willing to help.
POST UP YOUR PRINT ! I would love to see it. This has been one of my most favorite prints and i finally decided to upload my version of it.
This remix is based on
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)