Configurable Brick Sorter/Organizer/Storage Legos

Needed a way to store my Danish Building Bricks, while doing a build.  Wanted to sort them out into different part categories, etc.  Looked around and what I found were some good designs, but not flexible.   Some the storage box sizes were fixed, others the bins were fixed size ( if you needed large bins for long parts). 

So I decided to reuse some work from another project (https://makerworld.com/en/models/2080653-parametric-stacking-gridifnity-storage-box-trays#profileId-2248220), which allowed you to create a Gridfinity storage case.  For this project I changed the walls to be 1x thick building bricks with studs place on the top, with slots cut out in bottom so they are stackable, without sliding.

So the great part is you can create a setup as large or small as you need.  The project  uses Gridfinity bins (https://gridfinity.xyz/) and follows those standards.  You can make the storage a 5x5 or 4x3 or 7x7 for the H Series printers.  Make The storage as tall as you want, by changing the grid_z or dialing in your own height.  For example you can add lips to your bins, and select an 8U high solution to store 3U with lips.

Now for the bins, you can use any of the Gridfinity bin projects (https://makerworld.com/en/models/47599-ultimate-gridfinity-bins-collection-parametric?from=search#profileId-49334) or (https://makerworld.com/en/models/32315-gridfinity-2-6mm-wall-divider-bins-20-sizes?from=search#profileId-28952).  Just do a search.

And as a bonus there is an optional label you can add.

For creating your Storage solution here are the parameters.

• Box or Lid - You can create a Storage Box or Lid (also option to create a label).
• Grid X - size is Gridifnity bins (1 = 42mm)
• Grid Y - size is Gridifnity bins (1 = 42mm)
• Grid Z - Height in Gridfinity Units (1U = 7mm).
• Box Height - Alternative way of selecting Height, in mm.
• Label - None, Small or Large (see *.3mf, or select Label)

A note on the label, I didn't allow you to enter text.  It just the project creates a fitted blank, which you can use Bambu Studio to add text.

The .3mf project ha some examples of 4x3 for the A1 mini, and 5x5 which will fit the A1, P and X series.   You can generate larger for the H series.

There are some future items I will add (so check back).

• Thin lines on the walls to make the storage look like a brick.
• Possible way to split the Storage so you can stack two 4x2 on a 4x4.