Worx Landroid BBS RC/RS (BMW Style 5) wheel face

This is a quick-and-dirty remix of the awesome wheel made for a different mower by Sipupyksid.

For my purpose I only used the very primitive cut tools in Bambu Lab to take the individual elements and utilise the face, to replace the wheel on my Worx Landroid (this is for the WR140E, will fit other models but you may need to scale the wheel size up/down).

Notes on the model:

• The black background is too thin and will peel when it's printed in a multicolour  method. I added build plate 3 (black disc) to glue onto the back of the face.
• I siliconed the center cap onto the model after the wheel was fitted.
• The bolts used were M4x5mm and a nut - be careful when press-fitting onto the wheel, as you'll need to rotate the face to find the alignment where the back of the bolt will not foul the plastic wheel assembly.
• The tyre used is this model, but scaled to 109.1% to fit. https://makerworld.com/en/models/761418-worx-landroid-m700-spike-wheel-upgrade#profileId-696122 

Treat this as a WIP. I made this for my own purpose (as a one-off) but it could definitely benefit from improvements.