MISCHIEF NO. 13 of the shelf elf

PRANK NUMBER 13

The anticipated appearance of the police elf has brought, as expected, greater control over the elf, and of course, consequences arising from its actions. Following the traffic accident from the previous prank, there has already been a trial, and the elf faces a good spell in prison.

MODEL FEATURES:

• The cell / cage can be printed separately and placed on the ground. Or also with the support, which is included in a separate profile. 
• The bolt is functional, it opens and closes the door. It consists of three parts To assemble it, the pin must be inserted over the support, and once centered, glue the third piece into the pin's hole.
• The pieces fit together, but I recommend gluing them so that the door rotates without fear of coming out of its housing. I recommend impact adhesive, or better, two-component epoxy.

SUPPORTS:

The pedestal for hanging the cage has a hook with a movable part, which is already printed inside the ring. Additionally, the pedestal bar is H-shaped. Because of this, if the project is printed with usual supports, made with the same model material, it will be very difficult to remove them. To avoid this, I recommend printing the support interface in PETG, or in PLA if we make the model in PETG. For this, I will upload two different profiles, in one of them the support filament must be placed in the fourth AMS slot.

RELATED VIDEOS:

Below I present an AI-animated video about the prank, in case it helps. In fact, one of the ideas for the next season would be to install an elven surveillance camera…

LIST OF PRANKS AVAILABLE FOR DOWNLOAD:

PRANK No 1: The elf reappears in the house with a very disturbing sign in its hand. PRANK No 01 of the shelf elf by O3ga_3dprinting MakerWorld: Download Free 3D Models

PRANK No 2: The elf poops in a coffee cup - PRANK No 02 of the shelf elf Remixed by O3ga_3dprinting MakerWorld: Download Free 3D Models

PRANK No 3: The elf is getting very cheeky, this time it has forced one of my daughter's favorite dolls to be a target for archery practice. PRANK No 03 of the shelf elf by O3ga_3dprinting MakerWorld: Download Free 3D Models

PRANK No 4: The elf draws on the face of one of my daughter's dolls with a marker while she was sleeping. PRANK No 04 of the shelf elf by O3ga_3dprinting MakerWorld: Download Free 3D Models

PRANK No 5: The elf has spilled flour to simulate snow and make “angels,” which consists of lying on the snow and moving one's arms and legs to simulate a habit and wings on the sides. PRANK No 05 of the shelf elf by O3ga_3dprinting MakerWorld: Download Free 3D Models 

PRANK No 6: Upon arriving home, we found the elf with a knife in hand, and the same doll it practiced archery with in prank number 3, lying on the floor with a bloodstain.  PRANK No 04 of the shelf elf by O3ga_3dprinting MakerWorld: Download Free 3D Models

PRANK No 7: It seems the elf has taken up DIY and decided to build an igloo. The problem is that it started building it from the center of the circumference and ended up trapped inside the structure. It will need some architecture lessons… Customizable igloo for the shelf elf by 36whip MakerWorld: Download Free 3D Models

PRANK No 8: Once again the elf has targeted one of my daughter's dolls, what a fixation it has. I don't even dare to write what it did with it, better look at the photograph.  PRANK No 07 of the shelf elf by O3ga_3dprinting MakerWorld: Download Free 3D Models

PRANK No 9: When we got home, we found the elf sitting with a package in its hand and a sign that says: “forgive me, you deserve this gift”. It seems that the elf has finally repented and will start acting properly. But when the child opens the box the elf has in its hands, inside there is a poop like those from prank number 2. Another nasty prank from our friend… PRANK No 09 of the shelf elf by O3ga_3dprinting MakerWorld: Download Free 3D Models

PRANK No 10: It seems that the elven police have come to our house and put the elf in stocks, a kind of large handcuffs used in the Middle Ages to publicly display people who had committed a crime. It will surely spend a few days there until it is released, and it can reflect on how badly it has behaved.     PRANK No 09 of the shelf elf by O3ga_3dprinting MakerWorld: Download Free 3D Models

PRANK No 11: After spying on us while we watched fart prank videos on YouTube, the elves decided to imitate one of them, where a guy uses a tube ending at his wife's face to wake her up with a terrible fart. I have included the link to the prank, because it is best experienced by watching the prank with the child, being near the elves, so that they later believe they were inspired by the video.  PRANK No 11 of the shelf elf by O3ga_3dprinting MakerWorld: Download Free 3D Models

PRANK No 12: On this occasion, the elf has taken the MonsterHigh car and has been driving like a maniac. Another elf has set up a police checkpoint to try to stop it and prevent it from causing damage. The episode ends with an accident. PRANK No 12 of the shelf elf by O3ga_3dprinting MakerWorld: Download Free 3D Models 

PRANK No 12: Naturally, the traffic accident from the previous day led to a trial, and the elf ended up in the dungeon. PRANK No 13 of the shelf elf by O3ga_3dprinting MakerWorld: Download Free 3D Models 

FAREWELL MODEL A: Naturally, the other dolls have grown tired of the elf's pranks, and it seems someone has given it a taste of its own medicine. The fences can be downloaded in a Spanish text version, and also with English text. PRANK No 25 of the shelf elf (final) by O3ga_3dprinting MakerWorld: Download Free 3D Models

FAREWELL MODEL B: It is true that Farewell Model A is not suitable for all audiences. In view of this, I have uploaded a second option where the elf uses a magic portal to return to the North Pole, an undoubtedly friendlier option. Elf Farewell Mod B by O3ga_3dprinting MakerWorld: Download Free 3D Models 

RELATED MODELS:

MODULAR PANTS: Pants in two colors, white and red, or in a single color, which can be combined with different types of shoes and sock-like pompoms. Modular Pants on O3ga_3dprinting's shelf by O3ga_3dprinting MakerWorld: Download Free 3D Models 

MAGNETIC BOOTS: Boots with magnets inside to create the magic of attaching to different objects. The boots have a closed license and cannot be modified, although their accessories are published in a different profile with an open license, so users can create their own versions.

Magnetic Elf Boots by O3ga_3dprinting by O3ga_3dprinting MakerWorld: Download Free 3D Models 

Accessories for the Elf's Magnetic Boots by O3ga_3dprinting MakerWorld: Download Free 3D Models 

POLICE COSTUME: In case we have two elves, one will surely be better than the other, and perhaps the good one will find a police costume useful to control the bad one. This costume is compatible with the magnetic boots. Police Cosplay for Elf on the Shelf by O3ga_3dprinting MakerWorld: Download Free 3D Models