The Apothecary Diaries - Maomao - Hueforge
Print Profile(1)
Description
Free for personal printing use only.
Exclusive projects and commercial license available at Patreon.com/StrataPrints — your support keeps new designs coming! Check out the Jinshi available EXCLUSIVELY on Patreon!
Project: maomao.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 188.03x235mm in size
You may print at higher layer heights below the Base Thickness of 1.36mm
The Max allowed Thickness is 3.52mm and the Actual Thickness is 3.52mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5
#3f8e43 PLA BambuLab Basic Mistletoe Green Transmission Distance: 0.8
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
#0078bf PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
#becf00 PLA BambuLab Basic Bright Green Transmission Distance: 4.2
#cd007b PLA BambuLab Basic Magenta Transmission Distance: 3
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #19 (1.6mm) swap to Cyan
At layer #25 (2.08mm) swap to Mistletoe Green
At layer #29 (2.4mm) swap to Ivory White
At layer #30 (2.48mm) swap to Marine Blue
At layer #32 (2.64mm) swap to Bright Green
At layer #36 (2.96mm) swap to Magenta
At layer #39 (3.2mm) swap to Bright Green
Border Only Colors from here until the end.
At layer #40 (3.28mm) swap to Ivory White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)