Takamine Acoustic Guitar Hanger
Print Profile(1)
Description
Takamine Acoustic Guitar Wall Hanger – 3D Print File
I made this hanger specifically for Takamine acoustic guitars because I noticed something a little annoying: the neck area just below the headstock on a lot of Takamines is very rounded (both vertically and horizontally), and that shape was causing my guitar to slowly slip/rotate out of other 3D-printed hangers. So I designed this one to hold the guitar right below the widest part of the headstock, where it naturally sits more securely.
Print settings (important)
- Material: PETG
- Profile: Strength
- Wall mounting hardware not included
I’ve printed and tested this and it feels solid when printed with the settings above — but like anything wall-mounted, your print quality + wall anchoring matters a lot.
Mounting hole measurements (center-to-center)
- Top 2 screw holes: 28.57 mm (1.125 in) apart
- Bottom 2 screw holes: 20.00 mm (0.787 in) apart
- Vertical distance (top row to bottom row): 18.62 mm (0.733 in)
Minimum screw length recommendation (Home Depot “common size”)
- #10 x 4-1/2 in structural wood screw
Disclaimer
By downloading and using this file, you accept full responsibility for printing, mounting, and use. I’m not responsible for any damage to guitars, walls, or property due to hanger failure, improper printing, or improper installation.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)