Kahl Axe
Print Profile(1)
Bill of Materials
- Battery Bank x 1: https://www.amazon.com/dp/B09Z6T7FQ8?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1
Description
Loosely based on the LoV Kahl Axe, I designed this prop for the GN in 2025. I used a 1.5" PVC Pipe for the handle and wrapped it in faux leather. The battery bank can be inserted into the axe body. I installed the LEDs in the Pickaxe head, then ran the wires into the top. There is a push-button switch on the inside to turn the lights on and off. The lights would run for over 12 hours on a single charge.
The blades are thin and fragile to allow light to pass through them.
You will need to print of the three body pieces so that the threads can be aligned. The magnets are not required, but they help a lot.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)