RC - Spoiler Kit| Scale, 1:8 - 1:10 - 1:12

Rear Spoiler Kit - for RC Vehicle size 1:8 - 1:10 and 1:12

• This kit offers 12 plates,
  4 - plates for scales 1:10, 1:12 and 1:8

  
  
  This kit includes two types of spoilers, a standard low type and an LB high type

   

      

• Important points, Tips, tricks and materials.
   

  - Print in PLA TOUGH+ offering better strength, heat resistance and less breakable than Classic PLA

  - This model requires strong glue for the side fins.
  - (Supports printed in PLA TOUGH+)
  
  
  - Each part was printed on an A1 mini with a 3D effect plate - Carbon Fiber, to achieve this fiber effect on race car spoilers
  you can also use a Smooth PEI plate for easier release
   

• In this complete kit, you will need:

  x1 : Precision cutter.
  x1 : Glue kraftprotz PLA, ABS, PETG, TPU
  x4 : M3 dome head screws Ø 3x6 mm.
  x1 : 3 mm metal drill bit to make holes in the various car bodies

   

• Each print plate has been renamed for better understanding and good scale categorization.
  I have also added various colors to better guide the user

   

• You can complete this kit with 👉 Supercharger Kit
  
  ⚠️Please print only the parts you need, if it's for 1:10, do not print the rest.
   

   

• 👇read carefully

   

  Manual / Assembly :
  STEP - 1 :

  Take your favorite spoiler and side fins, as well as your strong glue of type kraftprotz PLA, ABS, PETG, TPU.

  

   

  STEP - 2 :

  Check the direction of the fins before gluing them! Then…

  Put a few drops of kraftprotz PLA, ABS, PETG, TPU in the groove of the fins and attach them to the spoiler, printed just before

  
  
  STEP - 2 :
  The result

  

   

   

  Plates - 1 to 4, scale 1:12

  ⚠️If you are starting with a 1:12 model, printing plates 5 to 8 and plates 9 to 13 is not necessary.
  
  Plate - 1
  x1 : LB style high spoiler for scale 1:12.
  
  Plate - 2
  x1 : Standard low style spoiler for scale 1:12.
  
  Plate - 3
  x1 : Left side fin 1:12.
  x1 : Right side fin 1:12.

  
  Plate - 4

  x2 : Mounting support 1:12.
   

   

   

  Plates - 5 to 8, scale 1:10

  ⚠️If you are starting with a 1:10 model, printing plates 1 to 4 and plates 9 to 13 is not necessary.
  
  Plate - 5
  x1 : LB style high spoiler for scale 1:10.
  
  Plate - 6
  x1 : Standard low style spoiler for scale 1:10.
  
  Plate - 7
  x1 : Left side fin 1:10.
  x1 : Right side fin 1:10.

  
  Plate - 8

  x2 : Mounting support 1:10.
  
   

  
  Plates - 9 to 12, scale 1:8

  ⚠️If you are starting with a 1:8 model, printing plates 1 to 4 and plates 5 to 8 is not necessary.
  
  Plate - 9
  x1 : LB style high spoiler for scale 1:8.
  
  Plate - 10
  x1 : Standard low style spoiler for scale 1:8.
  
  Plate - 11
  x1 : Left side fin 1:8.
  x1 : Right side fin 1:8.

  
  Plate - 12

  x2 : Mounting support 1:8.
   

  
  ⚠️let the plate cool down before removing the 3D parts⚠️