MiniCounter V2, with large Plus and Minus
Print Profile(1)
Description
Version of the MiniCounter V2 with added markings, BIG plus and minus.
If you want to print without AMS, you can color in the shapes after printing if you remove them in the slicer. For dials, look at the original MiniCounter V2 upload, it has dials specifically for printing without AMS.
This might be the world's smallest 0-99 counter (Before some of you scales it down in the slicer :P)
Useful as counters on MtG or any board game you might think of.
0.2 nozzle recommended but 0.4 works too!
In slicer:
Choose “Objects” and select the colors you want!
If the dial feels tight to turn, scale it in your slicer (or your print might be messy, get a deburring tool ;) ). Percent or two bigger will fix most issues. This is caused by differences in filaments and printers.
Assembly: Use a hard surface. After placing the halves together you can use your palm to press them together. If they do not connect with a snap, check that the dials are not misaligned, you can use a sharp object to maneuver them inside the casing.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)