Laptop stand fix

This 3D model is a replacement part for a laptop stand that broke. While it may not be an exact fit for every model, it can be a good starting point. If needed, people can always reach out for help matching exact dimensions.

Please note that the .stl file needs to be scaled to 10%, but you can also use the .3mf file with the exact configuration I used.

I have provided all design files as well as reference images for those who want to edit the design.

3D PRINTING SETTINGS

Printer used: Sovol SV06
Slicer: Prusa Slicer
Print settings: 0.15mm QUALITY
Print speed: 45 mm/s
Layer height: 0.15 mm
Support: Yes, regular supports. I did not try printing with tree supports.
Build plate adhesion: I used a brim with 5 lines but if you have good adhesion it's probably not needed.

Print time: 30 mins (with the settings and printer used)

Some models are fanart and are shared as artistic tributes, you may not sell, share, or profit from them. For original designs, a commercial license is required to sell physical prints (available on Maker World or Patreon).