Gatling Cub Gen 5 997 Brushed Motor Optimized Version

First, thanks to caili-29W

1 Updated to V20260215, optimized the high-speed spiral egg feeding parts, and improved the problem of insufficient egg feeding

2 Added a grip with self-tapping nuts, but this grip has not been tested for compatibility with original trigger accessories, please use DIY triggers

3 The unreliable installation documentation and BOM list are all in Tencent Docs: https://docs.qq.com/doc/DVUJzampsQ3ZmeExp

Historical dividing line-------------------------------

1 Updated to V20251231, added a relay switch cover, a 100A relay switch can now be used instead of a MOS switch

2 The protection circuit of the MOS switch did not work, it burned out many times, temporarily suspended use The corresponding content in the cloud document has also been updated

3 Corrected the problem of printed bearings in the original plate having excessive precision and inconsistency with the original version, switched back to the original printed bearings

I Optimizations made to the original Gatling's issues:

1 Optimized airtightness, shortened the installation distance between the nozzle and the inner tube

2 Removed the heat-set nuts from the nozzle holder, nozzle installation is simpler

3 Optimized the ladder/gear rack, bearings no longer get stuck

4 Optimized the ladder boss, better adapted for reinforcement part installation

5 Optimized electrical component selection, using a DC5.5*2.1 power plug and a D16 aviation plug

6 The protection circuit of the MOS switch did not work, temporarily suspended use,

7 Provides characteristic power display

8 Supports Dayi A3 battery

II Notes

1 The rear cover of the power compartment's plug installation differs slightly from the original version, mainly due to the use of a D16 aviation plug If you already have the original D20 plug, please continue to use the original printed parts

2 The circuit in this version is completely different from the original If you want to optimize the circuit, please refer to the simple content in the Tencent document https://docs.qq.com/doc/DVUJzampsQ3ZmeExp

3 Hardware parts are scattered throughout the document, due to limited energy, a complete list has not yet been compiled
4 Not very familiar with MakerWorld's print profile, because each part has a different function, please modify the print profile according to your personal preferences

5 Only A1 is available, I don't know how to design slice files for other printers, now I can only delete irrelevant printers

5 The images are from a personal research version, for reference only

III Others

Customized parts can now be ordered