Had some issues with a bit of support filament sticking on, but that's entirely self-inflicted - when you select Support for PLA as the interface material, it'll suggest changing a few support settings which I accepted... but then I switched from the 0.20mm to 0.24mm profile and that apparently overrides the support settings but not the interface material 🤦

Apart from that, the print came out great even at 0.24mm layer height! Not the tightest fit but the charger seems secure enough on there.

Alexander

Ikea Skadis Halter 

Ikea Skadis Holder

passt super in die Skadiswand, aber das Ladegerät sitzt etwas locker, daher habe ich das Kabel hinter der Skadiswand entlang gezogen damit es von da noch etwas gehalten wird.

fits great in the Skadis wall, but the charger sits a bit loosely, so I pulled the cable along the back of the Skadis wall so that it's held a bit by that.

BiMein

user_1417916225

Halter zum Schrauben 

Screw-on holder 

Arneby

user_1165374742

user_1241163733

Lulu

Hitower

olega

OmitsPrint

cover

IMG_E6966.JPG

IMG_6969.JPG

IMG_6981.JPG

IMG_7007.JPG

IMG_6979.JPG

IMG_6983.JPG

IMG_7005.JPG

IMG_E6993.JPG

IMG_6982.JPG

IMG_7004.JPG

IMG_7058.JPG

plate_1.png

2025-12-17_827531a13d45e8.jpg

Version zum Schrauben Stützen benötigt

Screw-on versionSupports required

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h3>Bosch Professional 12V Ladegerät Halterung  </h3>Eine Halterung die für das Ladegerät des Bosch Professional System entworfen wurde. Es gibt 2 Versionen, eine für das Ikea Skadis und die andere zum Schrauben. Das Loch zum Schrauben hat einen Durchmesser von 5mm.  Das Ladegerät kann schnell und sicher in die Halterung geschoben werden. Fragen oder Rückmeldungen sehr gerne schreiben. &nbsp;Weitere Halter für das Bosch System : https://makerworld.com/collections/17218525<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Es würde mich sehr Unterstützen, danke! Viel Spaß beim drucken</boostcontent></boostme>

<h3>Bosch Professional 12V Charger Mount </h3>A mount designed for the Bosch Professional System charger. There are 2 versions, one for the Ikea Skadis and the other for screwing. The screw hole has a diameter of 5mm. The charger can be quickly and securely slid into the mount. Feel free to write any questions or feedback &nbsp;More holders for the Bosch System : https://makerworld.com/collections/17218525<boostme><boosttitle>Boost Me</boosttitle><boostcontent>It would support me greatly, thank you! Have fun printing</boostcontent></boostme>

Print Profile(2)

Description

Bosch Professional 12V Charger Mount

Comment & Rating (14)

License

Related Models