Zootopia|Magnetic Instant Photo Frame|wide photo paper|editable text

This model is compatible with a 0.4 nozzle and uses round magnets with a diameter of 8mm and a height of 3mm. When printing, it is recommended to use the print profile that comes with the model. If you have a 0.2 nozzle, it is recommended to use a 0.2 nozzle, the model accuracy will be higher, and the printing time is basically the same

Designed a Zootopia 2 instant camera photo frame that supports wide mini photo paper. The base and panel need to be printed separately and then assembled with super glue

This model has two printing versions:

1. AMS printing: This version achieves multi-color printing through automatic filament changing, no manual operation required

2. Non-AMS printing: This version has automatic pauses set. During the pause, operate the device to change the filament to black, then resume printing

It is recommended to print this model using the project presets for the print profile. If you encounter unclear lines, you can set the following:
1. Layer height line width: It is recommended to set the line width (outer wall, inner wall, top surface) to 50-70% of the nozzle size, as shown in the figure below

2. Wall generator: Change to Arachne.
2.1: Minimum wall line width: Set to 50%

2.2: Minimum feature size: Set to 10%

Text editing tutorial:

1. First, select the object. In the editing section on the right, find the text object in the object options, which will turn into a blue box

2. Find the text tool in the top toolbar and click it. A text editing dialog box will appear, allowing you to modify the text. It also supports font and size modification

New model released on December 15: Christmas Magnetic Instant Photo Frame | Editable Text Blessing | Santa Claus (supports 3-inch, sq, and wide photo paper sizes)