Braveheart SW 200x200
Print Profile(1)
Description
Braveheart SW 200x200
Print at 100% infill with a layer height of 0.08 mm and a base layer of 0.16 mm
You can print in higher layer heights below the base thickness of 0.48 mm
The maximum thickness is 2.24 mm and the actual thickness is 1.84 mm
The following filaments were used:
#000000 PLA Bambu Lab Basic Black Transition distance: Platzhalter_0_Marker 0.4
#545454 PLA Bambu Lab Basic Dark Gray Transition distance: Platzhalter_0_Marker 0.6
#8e9089 PLA Bambu Lab Basic Gray Transition distance: Platzhalter_0_Marker 2
#ffffff PLA Bambu Lab Basic Jade White Transition distance: Platzhalter_0_Marker 5
Instructions for color change:
1.Start with Bambu Lab Basic Black
2.Change at layer height 10 (0.88) to Bambu Lab Basic Dark Gray
3.Change at layer height 11 (0.96) to Bambu Lab Basic Gray
4.Change at layer height 13 (1.12) to Bambu Lab Basic Jade White for the rest.
I would be happy to see some of your results here
Boost Me (for free)
Feel free to support me if you wish.
Thank you very much
Here are my other Hueforge pictures:
https://makerworld.com/en/models/2056947-indian-chief#profileId-2220488
https://makerworld.com/en/models/2061396-predator-200x200-mm#profileId-2225799
https://makerworld.com/en/models/2080399-indian-portrait-200x200#profileId-2247948
https://makerworld.com/en/models/2080432-indian-woman-200-x-200#profileId-2247983
https://makerworld.com/en/models/2104581-predator-portrait-200x200#profileId-2276191
https://makerworld.com/en/models/2131875-pennywise-sw-200x200#profileId-2308673
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)