Flywoo Wide Angle Whoop Canopy - Free 3D Print Model

Search models, users, collections, and posts

tcmoreFPV

Hobby & DIY>RC

IP Report

Print Profile(2)

All

A1 mini

P1S

H2C

P1P

H2D

X1E

H2S

X1 Carbon

P2S

H2D Pro

X2D

A2L

0.2mm layer, 2 walls, 50% infill

Designer

44 min

1 plate

5.0(1)

0.2mm layer, 2 walls, 50% infill

Designer

1.2 h

2 plates

Open in Bambu Studio

Boost

143

Released

Description

Want to fly with the Flywoo wide angle on a whoop? Look no further! I have been testing this for a couple days and making minor tweaks here and there. Check my instagram @_tcmore for some footage!

Freestyle:

https://www.instagram.com/reel/DSVPoPZDcVz/?igsh=c2dhN2NpbXJxM2dl

Crashes so far:

https://www.instagram.com/reel/DSYUxZYktkc/?igsh=MTJxc2dpNjNqa24wdQ

Print in TPU!
I used 50% I fill for my testing and it worked great!

You will want to get some short M1.4 screws I think 4mm or shorter. Even if they are a little too long if you snug em up it will still prevent the camera from popping out in heavier crashes. That is what I did because I do not have short enough screws at the moment.

If you want to help out please use my BetaFPV affiliate link when buying from them. It costs you nothing but I get a small percentage that goes straight back into buying FPV gear:
https://betafpv.com/tcmore