League of Legends - Urgot
Print Profile(2)
Description
Boost Me (for free)
Thank you for all the support in 2025, looking forward to bringing you all new designs in 2026!
I have created a 200mm and 100mm Hueforge of Urgot from League of Legends.
Filaments I used:
Sunlu Black PLA+
eSun Grey PLA+ (has a slight blue tint, and is darker grey)
Elegoo Red PLA
Elegoo Yellow PLA
Project: Urgot V3.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x199.01mm in size
You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.8mm and the Actual Thickness is 2mm
Filaments Used:
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#fb0a09 PLA Creality Hyper Red Transmission Distance: 3.7
#f3d538 PLA Overture Highlight Yellow Transmission Distance: 6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Blue Gray
At layer #16 (1.36mm) swap to Red
At layer #19 (1.6mm) swap to Highlight Yellow for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)