kneeling king hueforge
Print Profile(1)
Description
Another one here .A pause is enabled to change colors in AMS .Have fun and post pics of your prints!
Project: king.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.12mm
The Model is 133.33x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.6mm
Filaments Used:
PLA BambuLab Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Beige Transmission Distance: 8
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #18 (0.8mm) swap to Blue Gray
At layer #23 (1mm) swap to Pumpkin Orange
At layer #29 (1.24mm) swap to Jade White
At layer #44 (1.84mm) swap to Beige for the rest.
Boost Me (for free)
Remember to boost prints you like!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)