[V02] Animal Crossing Deciduous Tree, no AMS needed

Original model author: thingiverse: @designs

12/18, updated V02 version, compared to the first version:

• Increased the bottom brim to prevent rare tipping and spaghetti issues when printing multiple pieces.
• Optimized the support direction, currently using one leaf as the bottom surface, which reduces print lines on the treetop and drooping filament issues on some leaves (see comparison image), and makes the overall details of the tree canopy more complete.
• Added top ironing to reduce print lines on the bottom of the tree canopy for a better appearance.
   

Remixed part:

1. The trunk and canopy are separate parts, no ams needed;
2. Print parameters are manually adjusted to reduce printing risks; first layer height is recommended to be 0.08, other layer heights are recommended to be 0.1, to optimize molding details;
3. Support parameters are manually adjusted; the tree canopy is recommended to be printed inverted as it is currently, as printing upright makes supports difficult to remove and leaves noticeable support marks;
4. The tree canopy color can be changed freely: green for spring/summer, yellow for autumn, white for winter; feel free to be creative;
5. The tree trunk is recommended to be printed with wood filament.

6. Also provides model parameters for a 150% scaled-up version; the trunk's edges will be more pronounced when enlarged

    

Assembly instructions: No glue needed, assemble directly.

The gap between the tree canopy hole and the trunk diameter is very small; some force is needed during assembly, but it will be very firm after assembly, no glue is needed.

Please note the sharp parts at the base of the tree; avoid injury during assembly.