Elixir Golem NO AMS NEEDED - Clash Royale
Print Profile(1)
Description
This is my elixir golem model from the popular phone game Clash Royale. NO AMS is needed for this model!! This ensures higher quality, faster printing with zero filament waste. All you need is a few drops of glue. The elixir golem can be assembled in about 60 seconds if you have CA glue and accelerator. Just follow the pictures for assembly.
Assembly notes: The white eyes don't need glue. If they are too hard to push in, you probably have them backwards. They should go in about halfway with little resistance. Then use your fingernail or a little screwdriver to set them in all the way. Be sure there isn't any leftover support around the eyes that might interfere with the eyes being inserted. Also, the long dowels are for the wrist cuffs and hands. The short dowels are for the feet. Finally, make sure the Z-seam on the base is on the back side of golem. Don't accidentally glue the golem to the base and then you have to stare at the seam.
Check out the log in my model uploads if you like this golem! Also NO AMS needed for the log! Turns a 10 hour print into an hour with better quality and no waste.
Boost Me (for free)
If you like this model and want to show your appreciation, please send me a boost! It helps with my filament costs in printing prototypes for my models. Thank you :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)