Schicht Fabrik

cable tie / Kabelbinder

cover

Bildschirmfoto 2025-12-16 um 12.48.09.png

Bildschirmfoto 2025-12-16 um 12.48.15.png

Bildschirmfoto 2025-12-16 um 12.48.22.png

Bildschirmfoto 2025-12-16 um 12.58.37.png

Bildschirmfoto 2025-12-15 um 22.11.22.png

plate_1.png

IMG_1566.JPG

<ul><li>ohne Stützen</li><li>Schichthöhe: 0,2mm</li><li>Wandstärke: 3</li><li>15% infill</li><li>Material (TPU for AMS) (oder ähnliche)</li></ul>

<ul><li>no supports</li><li>Layer height: 0.2mm</li><li>Wall thickness: 3</li><li>15% infill</li><li>Material (TPU for AMS) (or similar)</li></ul>

0.2mm layer, 3 walls, 15% infill

Deutsche Version:Hallo Leute! Das Modell ist für FPV Drohnen, die eine DJI Air Unit O4 Pro verbaut haben. Die Antennenhalterung wird ohne Supports gedruckt. Die Antennen werden mit je einem 2mm breiten Kabelbinder fixiert (siehe Foto). Empfohlenes Material ist TPU. Die Antennenhalterung wird am Heck der Drohne montiert. Der diesbezügliche Lochabstand ist 25mm und Lochdurchmesser 5,2mm. Solltet ihr kleine Anpassungen der Maße benötigen, damit das Modell zu eurer Drohne passt, schreibt mir gerne hier oder auf Instagram.&nbsp;English version:Hello everyone!The model is designed for FPV drones equipped with a DJI Air Unit O4 Pro. The antenna mount is printed without supports. The antennas are secured with a 2 mm wide cable tie each (see photo). Recommended material is TPU. The antenna mount is installed at the rear of the drone. The corresponding hole spacing is 25 mm, and the hole diameter is 5.2 mm. If you need small adjustments to the dimensions to fit your drone, feel free to message me here or on Instagram.

German Version:Hello everyone! The model is for FPV drones that have a DJI Air Unit O4 Pro installed. The antenna mount is printed without supports. The antennas are fixed with a 2mm wide cable tie each (see photo). Recommended material is TPU. The antenna mount is mounted at the rear of the drone. The corresponding hole spacing is 25mm and hole diameter is 5.2mm. Should you need small adjustments to the dimensions for the model to fit your drone, feel free to write me here or on Instagram.&nbsp;English version:Hello everyone!The model is designed for FPV drones equipped with a DJI Air Unit O4 Pro. The antenna mount is printed without supports. The antennas are secured with a 2 mm wide cable tie each (see photo). Recommended material is TPU. The antenna mount is installed at the rear of the drone. The corresponding hole spacing is 25 mm, and the hole diameter is 5.2 mm. If you need small adjustments to the dimensions to fit your drone, feel free to message me here or on Instagram.

Print Profile(1)

Bill of Materials

Description

Comment & Rating (11)

License

Related Models

DJI O4 Pro - Antenna Mount