echo show 8 and 11 (2025) - Stand

echo show 8 / 11 (2025) - Stand

fits for:

• echo show 8 (4th generation, 2025)
• echo show 11 (1st generation, 2025)

I recommend using magnets (Ø8x3 - 4 pcs) for 7.5° and 15°.
 

Optional:

• rubber ring for the base for better grip printed in TPU (print plate 3)
• tray 15° (print plate 4)
• longer connecting piece with threaded ends (+15 and +30 mm; print plate 5)
• tray 0° (print plate 6)
• tray 5° (print plate 7)

Needed for assembly:

• 4 pcs of magnets (Ø8x3) - if you wanna use other diameter, you can adjust the negative part in the slicer
• a few drops of superglue

Instruction for assembly:

• Take the Inlay (Print plate 1) and press the magnets into the 4 holes until they reach the bottom of the holes. For better magnetic force, it's crucial that the magnets are close to the echo device. Theoretically, the remaining wall thickness is only 0.4 mm.
• I recommend to glue the inlay (with the magnets in it) into the tray. Sometimes the magnetic force pulled the part out of the tray, when I removed the stand from the echo device.
• Attach the optional rubber ring to the bottom of the base with a few drops of superglue.
• Simply screw the remaining parts together.