Claim Jumper Pick
Print Profile(1)
Bill of Materials
- LED Light Strip x 1: https://a.co/d/g3WDYn5
- Arduino Nano x 1: https://a.co/d/eSBH71P
- Battery Bank x 1: https://a.co/d/h636fpI
Description
Based on the Necromunda Claim Jumpers Pickaxe, I designed this prop for the GN in 2025. I used a 1.5" PVC Pipe for the handle and wrapped it in faux leather. The battery bank can be inserted into the pickaxe body. I installed the LEDs in the Pickaxe head, then ran the wires into the top. I was using the USB plug to turn the lights on and off. The lights would run for over 12 hours on a single charge. A switch could be added to turn the lights on and off.
The magnet holes on the locks and Pickaxe Body aren't needed, but I was using them for extra certainty that nothing would fall apart.
Attached is the Arduino code I used for the LED lights. Please convert the file back to INO to upload.
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)