Whomping willow from Harry Potter
Print Profile(1)
Description
Boost Me (for free)
Love this cranky tree? Consider boosting me.
Based on the ever so cranky Whomping Willow from Harry Potter
Recommended Print Settings
- Material: PLA / PLA Matte
- Nozzle: 0.4 mm (0.2 mm for ultra-fine branch detail)
- Layer height: 0.16 mm
- Supports: Tree supports (Organic, build plate only)
- Adhesion: Outer + Inner Brim (8–10 mm recommended)
Tips
- The model is scaled to 138% This improves branch strength and print reliability. But you can always scale up.
- Lower nozzle temperature slightly to reduce stringing
- A brim is strongly recommended due to the ring-shaped base
I lowered the nozzle temp to 215C when the smaller branches where printing, but still a cobweb like stringing appeared. I used hot tweezers (held them in a flame) and this removed most of the strings.
But you could leave them on, it really does look like cobwebbing. ;-)
I would love to see your pictures. Especially if you have Harry Potter themed diorama's. I need some more inspiration for my own diorama i'm planning to create.
Have a look at my other Harry Potter Themed creations, like the enchanted flying keys:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)