Search models, users, collections, and posts
BRICK x KAWS
IP Report
Print Profile(2)
200% size 0.08mm layer, 2 walls, 15% infill
Designer
5.5 h
1 plate
White eyes - w/ ak47 - 0.2mm layer, 2 walls, 15% infill
13.8 h
7 plates
Open in Bambu Studio
Boost
704
1401
79
42
1.3 k
612
Released
Description
This is a concept of what a L|E|G|O x KAWS Companion could look like. There are 3 variations of the head. One is just a regular l e g o head with a cap for the ears. The other two have the ears attached to the head, the only difference being one has a stud on top. I printed at 200%, but the original size should be very close to mini-figure scale.
Print Settings
Printer:
PRUSA MINI
Rafts:
No
Supports:
Yes
Resolution:
0.2 mm
Infill:
10%
Filament:
Overture PLA
MATTE BLACK
Notes:
These settings are for printing at 200%. Higher resolution may be desired for scale parts.
How I Designed This ===================
I used calipers and drawings to make the parts in Fusion 360
Category: 3D Printing
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (79)