Goku With Base FX NO AMS

🔥 Super Saiyan Power Unleashed – Goku Display Statue (MakerWorld Exclusive!) 🔥

Bring the raw, earth-shaking power of a true Super Saiyan to your collection! This high-impact Goku 3D model captures the exact moment of transformation — clenched fists, battle-ready stance, crackling energy, and an explosive aura rising from a shattered base. Every angle screams intensity, strength, and motion, making this a must-print centerpiece for anime fans and 3D printing enthusiasts alike. ⚡💥

💎 Why this model is an absolute must-have:

• 🧡 MakerWorld Exclusive – You won’t find this version anywhere else
• 🖨️ NO AMS REQUIRED – Designed for single-filament printers
• 🧩 Fully Separated Parts – Print smarter, not harder
  • Reduced print time
  • Less material waste
  • Cleaner details and easier reprints
• 🔥 Dynamic Energy Aura & Lightning Effects – Elevates the display to next-level realism
• 🗿 Epic Battle Base – Adds weight, presence, and a premium statue feel
• 🎯 Display-Ready – Perfect for desks, shelves, or collector showcases

Whether you’re printing for yourself or showing off your skills, this model is guaranteed to turn heads, spark conversations, and dominate your display. The modular design makes it enjoyable to print, satisfying to assemble, and stunning once complete.

👉 If you love anime, powerful displays, and clean 3D prints, this one’s a no-brainer.
🚀 Download it. Print it. Rate it. Comment on it. BOOST it.

Unleash the power.
 

Only on MakerWorld. 💛⚡

ATTENTION

• Lightnining: WARNING--- You must set print speed to 50%, fan settings as follows: 40% part fan, 40% aux fan, 60% exhaust fan. because they are small you must follow these settings (i have printed 23 fails before getting the right settings)

• It is a complex model, some pieces may need some heating before super glue (i use a jetlighter to soften) and squeeze in as they may be smaller or larger by a 1-2mm difference. 

• Black Base has a dot at the back of it, align it with the dot on the back of the Brown Rocky Base.

• Yellow translucent Aura will have some gaps/holes, when printing in translucent 0% infill 1 wall it will have those issues however it beats printing in 100% infill and with 1 wall you get that clean translucence, this drops the overall print time from 21 hours to 3.5 hours and the filament from 1.2k to 53 grams, big difference for minor imperfection which cannot be seen in translucent. If you are going to print in pla basic i suggest making some changes to the print settings and make it 15% infill. If you struggle to set it into the base you can cut off the bottom piece making it an open bottom and you can simply squeeze it into the slot (my first print i had to do this).

• Eyes- Separating the pupil to print separately could not be done as it is 1.83mm and cannot be printed so it has been left as a full white eyeball resembling the super saiyan rage form. if you wish to add a pupil it is much much easier to use a marker. I do however have a separated pupil if you wish to attempt it I can upload another.

A full AMS version will be released for the H2C 😬 hoping to have one on my doorsteps soon 🙏

Goku can be printed alone without the base.

This model has been in the works for over a month with many 6-8 hour days working on it then days of trials and errors and lots of wasted filament. Id put the overall hours at an estimate of 180 hours and your support would be very very appreciated and will keep bringing in some more amazing models to makerworld <3