Cowboy Riding into Sunset
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm (using HRM with first 4 layers at .16)
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 3mm and the Actual Depth is 3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyTerra Lava Red Transmission Distance: 1
PLA PolyTerra Sunrise Orange Transmission Distance: 2
PLA PolyLite Pro Cold White Transmission Distance: 0.5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Lava Red
At layer #20 (1.68mm) swap to Sunrise Orange
At layer #26 (2.16mm) swap to Cold White for the rest.
Boost Me (for free)
Boost if you like!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)