Skyrim Amuleto de Mara
Print Profile(1)
Description
The famous Amulet of Mara from Skyrim, so everyone knows you're available and to charm all the maidens :D
Everything can be printed without AMS with a 0.4 nozzle. I used Bambu Lab wood PLA filament (I'm in love with that filament), but you can use whatever material you want :D
The chain is printed ring by ring separately, they might be a bit rigid and tough, but theoretically if you pull a little, they can open so you can link them. If you encounter any problems, simply cut the thin part with scissors and that's it. You should have enough for everything with about 20 (in my model I used fewer because some rings failed me).
!!!!!VERY IMPORTANT!!!!!
To insert the large amulet into the joint, you need to print the joint on a separate plate, PAUSE AT LAYER 27, and insert the amulet through the holes as shown in the attached image, then continue printing. INSERT IT CAREFULLY AND ABOVE ALL ENSURE IT IS STRAIGHT AND DOES NOT PROTRUDE FROM THE TOP. If for any reason you encounter an error, simply scale the joint a little to have more clearance. I have tried it 4 times and all of them have turned out well, so you should not have any problems.
Boost Me (for free)
A little help for the poor, please
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)