Demon Slayer Kanroji Mitsuri (かんろじ みつり) Elegant Standing Pose Figure

This is a flowing standing pose figure of Love Hashira Mitsuri Kanroji from the anime Demon Slayer The finished height is approximately 29cm and it has many details Try not to scale down the printing It is recommended to use a 0.2mm nozzle for printing otherwise the facial accuracy will be relatively low The base can be printed with a 0.4mm nozzle to save time

The entire model was perfectly printed by myself using Bambu Lab A1 mini The placement angle has already been adjusted but it is recommended to print using a computer You can configure colors and layout yourself to reduce the risk of errors and re-prints The model I printed was only simply colored with acrylic paints and was not sanded The results shown may not be very refined Everyone is welcome to share their prints Since the head is one piece and not separated from the hair coloring the face is a big challenge It is recommended to first spray the face with a primer then slowly color it using a sufficiently fine liner brush

Due to the large size of the print profile it cannot be uploaded in one file therefore two print profiles are used The first print profile is for the main body the second print profile is for the base