Inline Fabrication Quick Change Plate - Parametric

Parametric - customizable quick change plate for use with Inline Fabrication Quick Change Base.

You can change the location of the 4 screw holes to fit your exact tool! 

This is great for lower-force applications like a priming tool or a case trimmer. Though, I still recommend printing this with high strength settings such as 6 walls, >40% infill (cubic, gyroid). 

The holes accommodate flush countersunk screws (the same type of screws that come with the Inline Fab plates) - the default setting is for ¼ inch counter sunk socket head screws (see image) but this can be changed to larger or smaller hardware.

Note: This printed plate is thicker than the real ones so the screws must be longer!

Hardware List (default):

• 6x 1/4" 20tpi - 1 1/4" countersunk socket head screw
• 6x 1/4" 20tpi nylon lock nut
• 4x 1/4" washer

Note: Each hole MUST exist so if your tool only has 2 mounting holes, just place the other 2 holes somewhere out of the way.

Note: Remember to add in tolerance if you change the screw size settings.

This plate does not lock into the base slot, it just sits on top of the plate and is secured with the usual hardware. I've found it is strong enough to support a Coax press while full length sizing.